Tags
Aktuelle Nachrichten
America
Aus Aller Welt
Breaking News
Canada
DE
Deutsch
Deutschsprechenden
Europa
Europe
Global News
Internationale Nachrichten aus aller Welt
Japan
Japan News
Kanada
Konflikt
Korea
Krieg in der Ukraine
Latest news
Map
Maps
Nachrichten
News
News Japan
Russischer Überfall auf die Ukraine seit 2022
Science
South Korea
Ukraine
UkraineWarVideoReport
Ukraine War Video Report
Ukrainian Conflict
United Kingdom
United States
United States of America
US
USA
USA Politics
Vereinigte Königreich Großbritannien und Nordirland
Vereinigtes Königreich
Welt
Welt-Nachrichten
Weltnachrichten
Wissenschaft
World
World News
4 Comments
That is the wrong place. Don’t turn those valves, they are set during installation and if you change them, it might need a company to reset them properly.
There should be a control device in your apartment to switch on the heating. Usually one or more little boxes on the walls, often with a dial.
That looks like underfloor heating; those valves you see are controlled by a thermostat in each room.
The thermostats are usually near the doors, and might have a dial with numbers on them. Turn up each thermostat to the temperature you want: room temperature is usually level 4, often marked with a dot.
The motors inside the valves often break down; your landlord may have to get a heating engineer in to replace faulty valves.
Is it completely new or has been used before? If new, probably some valve is not open enough but I would ask your landlord if they can do that or sent someone to check, as they have a laser to measure the flow and set it correctly.
I have a similar setup in my house and it is all automated. There are thermostats inside and outside and based on the current temperatures it will come on automatically to keep the house at the pre-set temperature. I haven’t touched a dial in years. Maybe the preset temperature is too low, there should be a console somewhere where you can set this.