[OC] Verfolgen Sie die Leistung der Wärmepumpe durch Verfolgung der Innengerätetemperaturen

Live in the northeast and have been using heat pump for heat pumps exclusively for a few years. I keep track of the Indoor unit temps to see if any changes occur which might be a sign of issues. I use a wemos D1 mini with ds18b20 temp sensors and the data goes into home assistant to get logged. The heat pump unit is a rebadged gree flexx sold by Mr cool as the universal. I had existing ductwork and air handler so all I had to do to convert from gas furnace to heat pump is swap out the outdoor unit. I did it myself by buying a scratch and dent unit online for $1k and about $599 worth of tools. It has been problem free for 3 years running.  The furnace is still hooked up to gas as emergency backup heat. Since I have solar there is no financial point at which gas is more viable so I run my heat pump until the indoor temp cannot maintain temp and it drops 2 degrees lower than setpoint( has not occurred ). The unit has worked down to -10 F and 40 mph winds. At -10 it started to not be able to keep up and the gas switched over too soon but I was because my settings were not set up correctly on the thermostat.